Pony Folding Work Table Review: Worth It? (October 2026)
The Pony folding work table is a 2-in-1 aluminum table and sawhorse with four clamps and four bench dogs in the box. Buy it to clamp small builds in a garage or yard, and skip it if you need a bench for heavy machines, since Pony rates the table at 500 lb.
On this page (15 sections)
- What the Pony folding work table is
- Size, weight and how it folds
- How high does the Pony folding work table go?
- Load rating: 500 lb as a table, 1,000 lb as a sawhorse
- Clamps, bench dogs and what's in the box
- Using the Pony as a sawhorse
- Pony vs Worx Pegasus: what to compare
- Care and checks before each job
- Trade-offs of the Pony folding work table
- Pony folding work table or a fixed small bench?
- Pony compared with two folding alternatives
- Who should buy the Pony folding work table
- Who should skip the Pony folding work table
- How we scored the Pony folding table
- Verdict on the Pony folding work table
The Pony folding work table is a good buy if you want one portable unit that clamps your work, folds flat and doubles as a sawhorse.
Skip it if you need a fixed bench for heavy machines, since Pony rates the table at 500 lb.
It's aluminum, it weighs about 32 lb, and the set includes four clamps and four bench dogs. That makes it a clamping table that goes where the job is, not a bench that stays put.
What the Pony folding work table is
Pony sells it as a portable folding work table, workbench and sawhorse in one. The frame is painted aluminum, and the same unit switches between the table and sawhorse setups.
Pony 2-in-1 portable folding work table
- 31 in deep, 25 in wide, up to 35 in tall, about 32 lb
- 2-in-1 table and sawhorse with an aluminum frame
- Six height settings, from 25 to 35 in
- Four clamps and four bench dogs in the set
- Folds flat, with no assembly
A 2-in-1 folding table with clamps, bench dogs and six heights. It suits a job that needs a clamping surface that moves, and its 500 lb table rating is the trade-off.
Pros
- Works as a worktable and a sawhorse
- Four clamps and four bench dogs in the box
- Six height settings, from 25 to 35 in
- Folds flat for a car or shed, with no assembly
Cons
- Pony rates the table at 500 lb, below a fixed bench
- At 31 in deep, it takes floor space
- No drawers, pegboard or power
There's no assembly, since you unfold it and use it. Pony says it's made for woodworkers and DIYers who move between jobs.
Size, weight and how it folds
The unit is 31 in deep, 25 in wide and 35 in tall at its highest setting. It weighs about 32 lb (14.5 kg), so one person can usually carry it from the car to the work spot.
Pony says the collapsible frame folds flat for a car, a garage or a storage room. The 31 in depth takes real floor space once it's open, so measure the spot before you set it up on a driveway or in a garage bay.
Lock the legs fully before you load the top, and check the hinges after each fold so nothing shifts mid-job.
How high does the Pony folding work table go?
It has six height settings, and the top sits anywhere from 25 to 35 in off the floor. The low end suits seated or low jobs, and the high end suits standing work.
Pony says the range suits garages, lawns and gardens. If you're tall, check that 35 in reaches your elbow, and use our guide to what height a garage workbench should be to find your number.
Set the height first and clamp the work after, so you don't have to move the piece twice.
Load rating: 500 lb as a table, 1,000 lb as a sawhorse
Pony says the table holds up to 500 lb and the sawhorse holds up to 1,000 lb. Those are the maker's ratings, not a guarantee.
Plan around the lower table number, since a higher sawhorse rating doesn't mean the flat top can take the same weight. Heavy machines and stacked lumber belong on a fixed bench, and how much weight a workbench can hold shows how to add up your own load.
Pony also says the aluminum leg frame is stronger than other workbenches. That's a claim, not a number you can plan around.
Clamps, bench dogs and what's in the box
The set includes the table, two 12 inch medium-duty E-Z HOLD bar clamps and two 6 inch light-duty E-Z HOLD bar clamps. It also has two large bench dogs, two small bench dogs and two safety straps.
That's enough hardware to start a small project without buying clamps. The quick clamps and holding pegs hold a board flat on the top, which is what makes it a bench and not just a stand.
Pony folding work table clamping setup
Lay the work on the top, then clamp it with the 12 inch bar clamps for wider pieces. Use the 6 inch clamps for small parts, and set a bench dog as a stop when you want the piece to stay put.
If your stock is wider than the 12 inch clamps open, you'll want longer clamps of your own.
Using the Pony as a sawhorse
In sawhorse mode, Pony rates the unit at 1,000 lb, double the table figure. One unit is one support, so a long board needs a second support at the far end.
Keep the weight over the frame, not hanging past it. Lock the legs before you cut, since a leg that slips mid-cut is the risk to avoid.
Pony vs Worx Pegasus: what to compare
People often weigh the Pony against the Worx Pegasus, which is also sold as a folding work table and sawhorse. The two aim at the same job, so compare the numbers that decide it.
Line up four of them for both: table load, sawhorse load, height range and the clamps in the box. For the Pony those are 500 lb, 1,000 lb, 25 to 35 in, and four clamps with four bench dogs.
Care and checks before each job
Wipe the top after use, since sawdust and glue left on the surface can carry onto the next piece. Keep the aluminum frame dry in storage so the legs and joints stay clean for folding.
Before each job, check the clamps and bench dogs, set the height and lock the legs. Outdoors, keep the table on flat ground and out of standing water.
Trade-offs of the Pony folding work table
The biggest is the load. At 500 lb as a table, it isn't a fixed bench for heavy machines, so it suits lighter bench work.
The second is the footprint. At 31 in deep, it's roomy once it's set up, so a small garage needs the floor space planned before you buy.
The third is storage. There are no drawers, no pegboard and no power, so you still need somewhere to keep tools.
The fourth is the sawhorse mode. It's a single support, so long boards need a second one.
Pony folding work table or a fixed small bench?
Pick the Pony if the table has to move or store flat, and pick a fixed bench if you work in the same spot every day.
Four benches in our small-workbench picks carry maker's ratings of 2,000 lb or more, at least four times the Pony's table figure. They also add drawers, shelves or a pegboard, which the Pony doesn't have.
The Pony wins on setup and storage, since it unfolds with no assembly and folds flat when the car needs the floor. For layouts that fit a tight garage, see garage workbench ideas for small garages.
Pony compared with two folding alternatives
The Keter is the closest alternative for a plastic top with no assembly, and the BORA is the pick when you need a bigger surface.
The Keter Heavy-Duty Folding Workbench is 33.46 in wide, 21.65 in deep and 27 lb, and Keter says it holds up to 1,000 lb. It stands at one height, 29.75 in.
The BORA Centipede is a 4 by 8 foot frame with a 30 inch working height. It folds to 38 by 10 by 15 inches and weighs 31 lb, and BORA says it carries 6,000 lb.
You add your own plywood or 2x4s for the top, so it's a frame more than a finished table.
Choose the Pony if you want a 2-in-1 table and sawhorse with clamps and bench dogs in the box. Choose the Keter for a plastic top with a higher load rating, and choose the BORA when you need a larger surface and will add a top.
If you're still deciding on the type of bench, read our portable workbench vs sawhorses comparison.
Who should buy the Pony folding work table
Buy it if you need a table that folds flat, a clamping surface and a sawhorse in one unit. It suits a garage, driveway or yard job where the table moves between spots.
It's a good fit for small builds, repairs and cutting work, where the clamps and bench dogs do the holding. It also works as a second bench next to a fixed one.
Who should skip the Pony folding work table
Skip it if you need a fixed bench for heavy machinery, a deep top or built-in storage. For a bench that stays put in a tight garage, see our best small workbenches for a garage.
If you need more surface, the BORA is the better fit. If you want drawers, see the mobile workbench vs tool chest comparison.
How we scored the Pony folding table
We compared the specs, the features and the load ratings, then scored the table against what a portable buyer needs. Our score weighs specs, features and buyer feedback against what you're shopping for.
The Pony scores 7.6 for its 2-in-1 design, its four clamps and bench dogs, and its folding frame. It loses points for the 500 lb table rating, the 31 in depth and the lack of storage.
Verdict on the Pony folding work table
Pick the Pony folding work table if you want a portable table that works as a sawhorse, with clamps and bench dogs in the box. Skip it if you need a heavy, fixed bench.
Check the 500 lb table rating against your heaviest job before you buy. For a broader look at garage benches, start with the garage workbenches buying guide.
Frequently asked questions
What load can the Pony folding work table hold?
Pony says the table holds up to 500 lb and the sawhorse holds up to 1,000 lb. Those are the maker's ratings, not a guarantee, so keep the load well inside the table figure and check the manual before you stack heavy material on it.
Is the Pony folding work table easy to fold and carry?
Yes, Pony says the frame folds flat for storage in a car, garage or storage room. It weighs about 32 lb, so one person can usually carry it, though it's still a bulky unit when it's set up.
What height can the Pony folding work table be set to?
It has six height settings, and the top sits between 25 and 35 inches off the floor. The low end suits seated or low jobs and the high end suits standing work, so check that 35 inches reaches your elbow if you're tall.
Does the Pony folding work table come with clamps?
Yes, the set includes two 12 inch medium-duty bar clamps, two 6 inch light-duty bar clamps, bench dogs and safety straps. Pony says the set suits woodworkers and DIYers, so check that the clamp sizes match the work you plan to do.
