Best Small Workbenches for a Garage
The best small workbenches for a garage include the IGERI 39.4 in Steel Workbench for a small bench with a drawer and pegboard, the Ultrawall Wall-Mounted Folding Workbench for the smallest footprint when folded, and the Northsky 48 in Adjustable Workbench for power outlets and pegboards on a 48 in top.
On this page (11 sections)
- The 7 best small workbenches for a garage in detail
- Side by side: footprint, height and rated load
- How we picked these seven small workbenches
- How much floor space does a small garage workbench need?
- Do wall-mounted folding benches work in a small garage?
- Folding or fixed: which small bench fits your garage?
- Which small bench is easiest to set up?
- What you give up when you go small: depth and rated load
- Does adjustable height matter on a small garage bench?
- Do you need power on a small garage bench?
- Which small workbench for a garage to pick
A small workbench for a garage makes sense when floor space is tight, the walkway has to stay clear, or you only need a modest work surface. This roundup compares seven compact benches on footprint, setup, stored size and sturdiness, from a wall-mounted folding bench to a 39.4 in steel bench with a drawer.
The fixed benches here run from 39.4 to 48 in wide, and one folding table stores flat. If your garage is tight, start with garage workbench ideas for small garages for layouts that fit.
Our picks at a glance
-
1
-
2
Best for the smallest footprint when foldedUltrawall Wall-Mounted Folding Workbench
8.6/10 our score
See it on Amazon -
3
Best for power outlets and pegboards on a 48 in topNorthsky 48 in Adjustable Workbench
8.4/10 our score
See it on Amazon
- 4
Check itUltrawall 47.5 in Adjustable Workbench
Best for a reversible top and eight heights - 5
Check itNorthsky 48 in Workbench With Wheels
Best for a bench that can roll when you need it - 6
Check itWORKPRO 47.2 in Crank Adjustable Workbench
Best for a crank height change with no motor - 7
Check itPony Portable Folding Work Table
Best for a folding table that doubles as a sawhorse
The 7 best small workbenches for a garage in detail
The IGERI scores highest because it has the smallest fixed footprint, with a steel frame and a drawer, and the Pony scores lowest because its 500 lb table rating and folding frame trade sturdiness for portability.
IGERI 39.4 in Steel Workbench
- 39.4 x 21.7 in top
- One full steel drawer
- Metal pegboard and lower mesh shelf
- Leveling feet for uneven concrete
A 39.4 in steel bench with a drawer and a pegboard. IGERI rates it for 2,000 lb, which suits a small garage corner that still needs a real work surface.
Pros
- Smallest fixed bench in this roundup
- Drawer, mesh shelf and metal pegboard in one unit
- Leveling feet for uneven concrete
Cons
- One drawer and no cabinet
- Engineered wood top, not solid wood
IGERI suits a small garage corner that still needs a steel frame and a drawer. At 39.4 in wide and 21.7 in deep, it is the smallest fixed bench in this roundup.
IGERI rates the all-steel frame for 2,000 lb, and it describes the engineered wood top as scratch resistant. The bench weighs 37 lb, and assembly is required.
The full steel drawer runs on smooth-glide slides, a lower mesh shelf holds heavy tools, and the metal pegboard turns wall space into tool storage.
Adjustable leveling feet help the bench sit flat on uneven concrete. The working height is 35 in, and the overall height is 46.8 in.
Check the 35 in working height against your own reach before you order.
The catch is storage, since it has one drawer and no cabinet. The top is engineered wood, so keep it dry.
Skip it if you need a deep top for large projects. Pick it if you want steel, a drawer and a pegboard in a compact footprint.
Ultrawall Wall-Mounted Folding Workbench
- Folds down to under 4 in of garage space
- Powder coated steel brackets
- Pine top
- Latch locks the top in place
A folding bench that drops to under 4 in of garage space. Ultrawall rates the steel brackets for 550 lb, and a latch locks the top in place.
Pros
- Smallest stored size in this roundup
- Mounting hardware and an installation guide in the box
- Brackets rated for 550 lb
Cons
- Needs a wall mount, so follow the maker's steps closely
- Ultrawall doesn't state how deep the top is when open
Ultrawall's wall-mounted bench suits a garage where floor space matters more than a full-depth top. It folds down in a few seconds and takes less than 4 in of garage space when it's not in use.
The top is natural pine, and Ultrawall says its powder coated steel brackets resist rust, chipping and cracking. Ultrawall rates the brackets for 550 lb, and a latch locks the top in place.
The mounting hardware and an installation guide come in the box, and Ultrawall offers installation support. Follow the maker's instructions for the mount, and ask a professional if you're unsure about your wall.
Folded, the bench sits flat against the wall, so the floor stays clear for a car or a walkway.
The catch is the top. Ultrawall gives 49.75 in wide, 3.5 in deep and 28.25 in high as the size and doesn't state how deep the top is when open, so confirm that before you order.
Skip it if you need a bench that stands on the floor. Pick it if the wall is the only space you have.
Northsky 48 in Adjustable Workbench
- 4 AC outlets and 2 USB ports
- Dual pegboards with 6 hooks
- Height from 28 to 43.4 in
- Two units join into a 96 in table
Four outlets, two USB ports and dual pegboards on a 48 in bench. Northsky rates it for 2,000 lb, and two units can join into a 96 in table.
Pros
- Power strip built into the bench
- Dual pegboards with 6 hooks
- Adjusts across seven levels
Cons
- Top is 0.8 in engineered wood, thinner than the Northsky with wheels
- Northsky backs it for one year
Northsky's 48 in bench suits a garage that needs power at the work surface and pegboard storage without a big footprint. It is 48 in wide, 24 in deep and 43 in tall, and Northsky rates it for 2,000 lb.
The height adjusts from 28 to 43.4 in across seven levels, and tool-free locking knobs on the legs hold each setting.
One side has a power strip that Northsky says is ETL certified, with 4 AC outlets, 2 USB ports and a 6.5 ft cord.
Dual pegboards hold 6 hooks, three short and three long, for wrenches, pliers and tape measures. The top is 0.8 in engineered wood.
The straight edges let you join two units into a 96 in table. It weighs 40 lb, and Northsky backs it with a one-year warranty.
The catch is the 0.8 in top, which is thinner than the 1 in top on the Northsky with wheels.
Skip it if a thicker top matters most. Pick it if power and pegboards matter more than a wide top.
Ultrawall 47.5 in Adjustable Workbench
- Reversible rubberwood top
- 8 height settings, 29 to 41 in
- Dual crossbars and non-slip feet
- Coated steel legs
A reversible rubberwood top with eight height settings. Ultrawall rates it for 2,000 lb, and the dual crossbars add stability in a small frame.
Pros
- Top flips when one side wears
- Eight height settings
- Non-slip feet keep it in place
Cons
- No drawer, pegboard or power strip
- No pre-drilled holes in the top, so any drilling is up to you
Ultrawall's 47.5 in adjustable bench suits someone who wants a height range and a solid wood top in a small frame. It has eight height settings from 29 to 41 in, so it works for sitting or standing.
The top is solid rubberwood with a polished finish, and Ultrawall says it resists wear and cracks. It's reversible, so you can flip it when one side wears.
The legs are coated steel that Ultrawall says resists rust, and an H-shaped frame with dual crossbars adds stability. Non-slip feet keep it in place, and Ultrawall rates it for 2,000 lb.
The top has no pre-drilled holes because both sides are painted and usable, so any drilling is up to you. The bench weighs 44 lb.
The catch is that it has no drawer, pegboard or power, and the top is 23.5 in deep.
Skip it if you want built-in storage. Pick it if you want a reversible top and eight heights in a small frame.
Northsky 48 in Workbench With Wheels
- Main surface rated 2,200 lb
- Rear shelf and lower shelf
- 5 long and 6 short hooks
- Optional casters included
A 48 in bench with a 2,200 lb main surface and storage on the rear and both sides. Northsky says the lower shelf holds 500 lb, and casters come with it as an option.
Pros
- Highest rated load on the main surface here
- Rear shelf, lower shelf and two pegboards
- Casters or leveling feet, your choice
Cons
- At 79 lb, it is the heaviest bench here with a stated weight
- Northsky backs it for one year
Northsky's 48 in bench with wheels suits a garage that needs storage on the rear and both sides, plus casters you can add. It is 48 in wide, 23.6 in deep and 43.4 in tall, and Northsky rates the main surface for 2,200 lb.
The rear shelf has 4 open compartments for hand tools and hardware, and the lower shelf, rated for 500 lb, holds toolboxes and larger equipment.
Dual steel pegboards carry 5 long hooks and 6 short hooks. A built-in power strip has 4 AC outlets, a USB-A port, a USB-C port and a 6.5 ft cord.
The 1 in engineered wood top gives 48 by 23.6 in of room for repairs and assembly. Leveling feet help on uneven floors, and the optional casters come in the box.
The catch is weight, since at 79 lb it is the heaviest bench here with a stated weight. Northsky backs it for one year.
Skip it if you want the lightest bench. Pick it if you want the most storage on a 48 in top, plus casters.
WORKPRO 47.2 in Crank Adjustable Workbench
- Hand crank, no power
- Crank tucks under the top
- Rubberwood top on a steel base
- Leveling pads on widened feet
A manual crank raises the top from 28.7 to 47.2 in, with no power needed. WORKPRO rates it for 300 lb, which suits tools, a 3D printer or a sewing machine.
Pros
- Height changes with a crank, no motor
- Crank tucks under the top when not in use
- Leveling pads for slightly uneven floors
Cons
- 300 lb is the lowest rated load here
- You turn the crank by hand each time you change height
WORKPRO's 47.2 by 23.6 in bench suits someone who wants a height change without power. The crank raises the top from 28.7 to 47.2 in, so one bench can serve seated and standing work.
The crank tucks under the tabletop when you don't need it, which keeps the work area clear. WORKPRO says a hand crank avoids the electrical failures of motorized lifts.
The top is solid rubberwood, and the frame is SPCC cold-rolled steel. Widened T-shaped feet and adjustable leveling pads help it sit still, including on slightly uneven floors.
The lifting mechanism comes pre-installed, which WORKPRO says simplifies setup. WORKPRO rates the bench for 300 lb, which fits tools, a 3D printer or a sewing machine.
The catch is that 300 lb rating, the lowest here, so it suits light tools more than heavy gear.
Skip it if you plan to clamp heavy tools to it. Pick it if you want height adjustment without a motor.
Pony Portable Folding Work Table
- Folds flat for a car or shed
- Four clamps and four bench dogs
- 1,000 lb as a sawhorse
- Six height settings up to 35 in
A 2-in-1 folding table and sawhorse with clamps and bench dogs in the set. Pony rates the table for 500 lb and the sawhorse for 1,000 lb.
Pros
- Folds flat for storage
- Table and sawhorse in one
- Lightest bench here at about 32 lb
Cons
- 500 lb as a table is well below the 2,000 lb benches here
- The sawhorse rating is a separate figure, so use the table rating for work
Pony's folding table suits someone who wants a bench and a sawhorse in one, with a frame that folds flat for storage. It is 25 in wide, 31 in deep and 35 in tall.
Six height settings run up to 35 in. Pony gives the low end as 30 in in one place and 25 in in another, so check the lowest setting if height matters.
Pony rates the table for 500 lb and the sawhorse for 1,000 lb, as separate figures.
Four clamps, four bench dogs and two safety straps come in the set. There's no assembly, since you simply unfold it.
The aluminum legs fold flat, and Pony says it fits in a car, a garage or a storage room. At 14.5 kg, or about 32 lb, it is the lightest bench here.
The catch is the rating, since 500 lb as a table is well below the 2,000 lb benches here.
Skip it if you need a fixed bench for daily work. Pick it if you move between jobs or need a table and a sawhorse together.
Side by side: footprint, height and rated load
Footprint decides most small-garage choices, so compare width and depth first, then height. The IGERI is the smallest fixed bench here, and the Ultrawall wall-mounted bench stores at under 4 in deep.
The table reads size as width, depth and height in inches, and the height column shows each bench's range. Use it to build a shortlist, then read the card for each bench on it.
| Product | Best for | Size | Height | Rated load | Our score |
|---|---|---|---|---|---|
| IGERI 39.4 in Steel Workbench | a small bench with a drawer and pegboard | 39.4 x 21.7 x 46.8 in | 35 in working height | 2,000 lb (maker's rating) | 8.9 |
| Ultrawall Wall-Mounted Folding Workbench | the smallest footprint when folded | 49.75 x 3.5 x 28.25 in | Wall mounted, folds down | 550 lb (maker's rating) | 8.6 |
| Northsky 48 in Adjustable Workbench | power outlets and pegboards on a 48 in top | 48 x 24 x 43 in | 28 to 43.4 in | 2,000 lb (maker's rating) | 8.4 |
| Ultrawall 47.5 in Adjustable Workbench | a reversible top and eight heights | 47.5 x 23.5 x 41 in | 29 to 41 in | 2,000 lb (maker's rating) | 8.0 |
| Northsky 48 in Workbench With Wheels | a bench that can roll when you need it | 48 x 23.6 x 43.4 in | 27.9 to 43.4 in | 2,200 lb main surface (maker's rating) | 7.8 |
| WORKPRO 47.2 in Crank Adjustable Workbench | a crank height change with no motor | 47.2 x 23.6 in top | 28.7 to 47.2 in | 300 lb (maker's rating) | 7.1 |
| Pony Portable Folding Work Table | a folding table that doubles as a sawhorse | 25 x 31 x 35 in | 30 to 35 in (also given as 25 to 35 in) | 500 lb as a table (maker's rating) | 6.8 |
How we picked these seven small workbenches
We compared specs and materials, and we looked at what owners report, then scored each bench against what a small workbench for a garage has to do. Our score weighs specs, features and buyer feedback against what you're shopping for.
We ranked on footprint, setup, stored size and sturdiness. Footprint comes from the width and depth, setup from whether you mount, assemble or unfold the bench, and stored size from how small it gets when you're done.
Sturdiness comes from the rated load, the frame and the top. We left price out of the score, so it reflects the bench itself.
Setup counts for more than it seems, since a bench that needs a wall mount or a long build is harder to finish in one sitting. Stored size counts too, because a folded bench only helps if it actually folds away.
How much floor space does a small garage workbench need?
Measure the spot and the walkway before you pick a size, because a bench that fits the wall can still block the way to the door.
Small workbench for garage: measure the walkway first
Leave a clear walkway that matches how you move through the garage, and count the space needed to open a drawer or a door. Measure from the wall to the far edge of the bench, not just the length of the wall.
The fixed benches here are 39.4 to 48 in wide and 21.7 to 24 in deep. Use what size garage workbench do you need to pick the size that fits your work.
Width decides how much tool surface you get, and depth decides how far a project can reach from the wall. A deeper top helps with long boards and large parts, while a narrow top leaves more walkway.
The Pony is the exception. It stores flat, but it is 31 in deep when open, deeper than any fixed bench here, so it needs floor space while you work.
Before you pick a size, measure these four things.
- The wall length, from the corner to the nearest door or window.
- The walkway, measured with the bench in place.
- The height of any shelf or pipe above the bench.
- The space needed to open a drawer or a cabinet door fully.
Write the numbers down before you start comparing benches.
Do wall-mounted folding benches work in a small garage?
A wall-mounted folding bench saves the most floor space, but it only works if the mount suits your wall and you follow the maker's instructions.
Ultrawall's bench folds to under 4 in, and Ultrawall rates its brackets for 550 lb. That is the maker's rating for the brackets, not a promise for every use.
Follow the installation guide and the hardware list in the box, and use Ultrawall's installation support if you have questions.
Ultrawall doesn't say the bench suits a vise or a heavy machine, so choose a fixed bench for that kind of work. A folding bench also keeps the floor clear when you're done, which helps a garage that doubles as a car space.
Folding or fixed: which small bench fits your garage?
A fixed bench gives you a steady top every day, while a folding bench or table gives back floor space when you're done.
The Pony folds flat for a car or storage room, and the Ultrawall folds against the wall. The IGERI, both Northsky benches, the Ultrawall 47.5 and the WORKPRO stay on the floor, so they suit a set spot in the garage.
Ultrawall says its bench folds down in a few seconds, and the Pony unfolds with no assembly. Even so, you open and close them each time, so they suit occasional work better than all-day work.
A fixed bench suits a corner you use every day, and it needs a permanent spot that you measure before you buy.
For a folding table you can move between jobs, read portable workbench vs sawhorses.
Which small bench is easiest to set up?
The Pony is the easiest, since it unfolds with no assembly, and the Ultrawall wall bench needs the most care, because you mount it to the wall.
WORKPRO ships with its lifting mechanism pre-installed, and the IGERI, both Northsky benches and the Ultrawall 47.5 all come with assembly instructions. Northsky calls the build on its 48 in bench a straightforward assembly process, and Ultrawall says its 47.5 in instructions are clear.
Every bench except the Pony needs some assembly or mounting, so check the box for damage on delivery and count the hardware against the instructions. The Northsky with wheels is the heaviest at 79 lb, so have a second person ready.
What you give up when you go small: depth and rated load
Going small costs you surface depth and rated load, so check both before you buy. The table puts the two numbers side by side.
| Bench | Top depth | Rated load (maker's rating) |
|---|---|---|
| IGERI | 21.7 in | 2,000 lb |
| Ultrawall wall-mounted | Open depth not stated | 550 lb (brackets) |
| Northsky 48 | 24 in | 2,000 lb |
| Ultrawall 47.5 | 23.5 in | 2,000 lb |
| Northsky with wheels | 23.6 in | 2,200 lb (main surface) |
| WORKPRO | 23.6 in | 300 lb |
| Pony | 31 in | 500 lb (as a table) |
Surface depth is where small benches feel tight. A 21.7 in top gives 2.3 in less room than a 24 in top, and that shows up on a long board.
For the depth you need, read how deep should a garage workbench be.
Rated load is the other trade, and the WORKPRO's 300 lb and the Pony's 500 lb table rating sit at the bottom.
The 2,000 lb figures on the other benches are maker's numbers, and they assume the weight is spread evenly. Add up the weight of the tools you already own before you choose, since a vise, a drill press and a box of parts add up faster than you expect.
Does adjustable height matter on a small garage bench?
It matters if you switch between sitting and standing, because a height range lets one bench serve both jobs.
Northsky's 48 in bench adjusts from 28 to 43.4 in, and the wheeled Northsky runs from 27.9 to 43.4 in. Ultrawall's 47.5 in bench has eight settings from 29 to 41 in, and WORKPRO's crank covers 28.7 to 47.2 in.
The Pony table has six heights up to 35 in, which suits a folding table used for different jobs. The IGERI gives one 35 in working height, so check it against your own reach before you order.
WORKPRO's crank needs no power, which suits a garage with no outlet nearby. Height adjustment doesn't change the footprint, so the space you measure stays the same at every setting.
If you have ongoing back, neck or shoulder pain, talk with a doctor about the height that suits you.
Do you need power on a small garage bench?
Only the two Northsky benches have power built in, so every other pick here needs a wall outlet nearby for any corded tool. Both Northsky strips have 4 AC outlets, USB ports and a 6.5 ft cord, and Northsky says they're ETL certified.
That cord length sets where the bench can sit, since it has to stay within reach of a wall outlet.
A strip on the bench still plugs into the same wall outlet as everything else. Follow the maker's manual, and ask a licensed electrician about the circuit if you plan to run several power tools at once.
The IGERI, both Ultrawall benches, the WORKPRO and the Pony have no power built in, so plan where the outlet is before you place them.
Which small workbench for a garage to pick
Pick the IGERI if you want steel, a drawer and the smallest fixed footprint here.
Pick the Ultrawall wall-mounted bench if floor space matters more than a full top.
Pick the Northsky 48 if you want power outlets and pegboards on a 48 in top.
Pick the Ultrawall 47.5 if a reversible top and eight height settings matter most.
Pick the Northsky with wheels if you want storage on the rear and a bench you can roll. Pick the WORKPRO if you want a crank with no motor, or the Pony if you need a table that folds flat.
If you need rolling storage instead, see best mobile workbenches with drawers.
If two benches are close, pick the one with the sturdier top and the storage you'll use each week.
For the full picture, start with the garage workbenches buying guide.
Our top 3 picks at a glance
-
1
-
2
Best for the smallest footprint when folded
Ultrawall Wall-Mounted Folding Workbench
8.6/10 our score
See it on Amazon -
3
Best for power outlets and pegboards on a 48 in top
Northsky 48 in Adjustable Workbench
8.4/10 our score
See it on Amazon
Frequently asked questions
How big is a small workbench for a garage?
The fixed benches here are 39.4 to 48 in wide and 21.7 to 24 in deep, while the Ultrawall wall bench folds to under 4 in and the Pony folding table folds flat. Measure the spot and the walkway before you choose, and leave room to open any drawers.
Can a wall-mounted folding workbench take heavy tools?
Ultrawall rates its brackets for 550 lb, which is the maker's rating, not a promise for every use. What the mount can really take depends on your wall and the install, so follow Ultrawall's instructions and ask a professional if you're unsure, and a fixed bench is the usual choice for a vise or heavy machine.
Is an adjustable height bench a good fit for a small garage?
It can be, because the footprint stays the same at any height, so the space you measure holds true. Northsky, Ultrawall and WORKPRO all adjust their height, and WORKPRO uses a hand crank with no power, so check the height range against your own reach before you choose.
Which small garage bench has the most storage?
The Northsky with wheels has a rear shelf with 4 open compartments, a lower shelf and dual pegboards with 11 hooks, while the Northsky 48 has dual pegboards with 6 hooks and the IGERI adds a drawer. Pick the one that matches the tools you use most.
